
Meet the Team – Michael Weidman
Meet Michael Weidman, Senior Project Manager at DiAN Construction Services.
Yellowbird Consultants: Michael, why did you choose to work for DiAN?
Michael: During the interview process as conversations ensued, I realized that the management at DiAN Construction Services and I have many of the same ideals, standards, and work ethics. I felt that I could be a positive asset to help their team.
Yellowbird Consultants: Can you share a bit about your background and how you became a Senior Project Manager at DiAN Construction Services?
Michael: 28 years in the rebar business is difficult to provide in a condensed version! I learned rebar from the bottom up. I started in 1996 as a laborer shaking 60’-0” lengths of rebar for a shear operator on a shearline. Within 30 days I learned to operate the shear on my own. I found out I could earn more if I could operate a bending machine, so I learned how to operate a table bender as well as to operate all the auto benders in the shop. After 12 months I was able to work on any piece of equipment in the fabrication shop. After 18 months of working as a shear operator and bender operator in the fabrication shop, I was trained to operate the overhead crane and to load trailers. I was taught how to properly load the cut and bent rebar in such a manner that there would be ease and safety for unloading on the job site. I was then tasked by the company vice-president and operations manager as “Quality Control” for the fabrication shop. After working in the shop for four years, I was given the opportunity to advance into the office to use my degree in drafting and design as a rebar detailer.
The shop experience I learned in conjunction with my drafting and design degree allowed me to quickly advance in detailing. My education gave me the ability to read and understand contract drawings (e.g., structural drawings, architectural drawings, HVAC / MEP drawings, landscape drawings, etc.). My shop experience gave me the knowledge of the rebar bend types and the physical properties of the steel to ensure that what I detailed would fit appropriately into the formwork. After 12 months in the office, I was detailing and managing my own projects.
A detailer who is detailing and managing is limited by what can be effectively handled. After four years of detailing, I was made a full-time PM and given inside as well as outside detailers to work with. I coordinated with the operation manager and the detailing manager to determine detailing standards for outside detailing. This is important because we wanted all our drawings to be uniform whether detailed in-house or outside.
I was a project manager for 10 years when the company decided to supply and place material using our own rebar installers as well as outside placing companies. I was given the opportunity to project manage the detailing and installation of the reinforcing. As the project manager I handled the entire project from awarding the job to topping out. I attended progress meetings, job site meetings, worked with the GC’s project engineer and inspectors, as well as the rebar installers to ensure that all project issues were resolved quickly, correctly and did not impact concrete pour dates.
After 20 years with the same company (13 years working as a project manager), I interviewed and was hired as the regional manager for detailing for a detailing company. I was responsible for setting up a company branch in Lebanon, NJ and was quickly promoted to general manager of detailing and business development. I had access to 120 detailers, with between 6 and 8 team leaders/project managers working for me, and the responsibility for 80 to 120 projects at a time. My area of operations encompassed New Jersey, all of NYC and New York to the Canadian border, and as far south as the DC Baltimore Metro area averaging 27K to 30K tons of detailing capacity per month. After 12 months at Lebanon, NJ, I helped set up an estimating branch which would be managed out of the NJ office. I brought in a colleague / estimator that I previously worked with who could handle the position of chief estimator.
After five years with this company, nationwide shutdowns due to COVID forced the branch to close. I was then approached by a rebar placing company located in Queens, NY, who wanted to expand into detailing and fabricating their own rebar for use on their projects to allow for better cost control of projects. I was hired as their detailing manager to work remotely from home. I coordinated with the operation managers and rebar placing foremen to develop a detailing profile and standards. Once the profile and standards were reviewed and approved, I was responsible for reaching out to outside detailing and estimating companies to perform work. The economy continued its downturn during COVID, leading to the elimination of my position as detailing manager.
For the remainder of the COVID time-period I worked with a temporary service as a project manager for a restoration company and an assistant project manager for a structural steel company. As we came out of COVID I received a call from DiAN Construction Services. My previous work experience as well as what I like to do seemed to be a good fit.
Yellowbird Consultants: Can you walk us through a particularly complex project you’ve worked on and how you navigated the detailing challenges?
Michael: I have significant experience with elegant architectural designs that contain odd shapes and multiple radiused elements. The Nemours/Alfred I. duPont Hospital for Children expansion in Delaware was a challenge because all interior rooms were pre-fabricated modules, which were brought to the site as complete units to be placed in exact locations and interconnected. All drains, piping, and embeds had to be coordinated so that everything would marry-up on site. Using a 3D model, each drain, pipe, and embed location was downloaded into a total station so that a surveyor could layout all the concrete elements.
I have learned that the complexity of any project can be navigated through good communication with the jobsite and by knowing the appropriate questions to ask. Many aspects of a complex project can be broken down into chunks that are easier to work with. It’s also important to be able to step back to see the larger picture of what is going on.
Yellowbird Consultants: What motivates you?
Michael: Each project is unique. There are many factors that will be implemented into a project. I enjoy those challenges and get a feeling of accomplishment when a project is completed.
Yellowbird Consultants: When qualifying new detailing teams, what key skills and attributes do you look for?
Michael: When qualifying a detailing team, I look for a fundamental understanding of the CRSI standards, a clean presentation without extraneous features as well as consistency in the team’s work. I also take into account questions and conversations about the job before detailing begins and gauge their understanding of the need for placing the rebar with ease.
Yellowbird Consultants: Your organizational skills are highly regarded. What strategies or tools do you use to manage your workload effectively?
Michael: I use Microsoft, AutoCAD, and Bluebeam software to keep track of the status of each rebar drawing submittal and take meticulous job notes based upon jobsite conversations. This gives me the opportunity to derive a defined critical path and adjust the path as needed during the progression of the project throughout the job cycle. All the job information needs to be organized in such a manner that it can be easily located and presented when needed in a short period of time.
